This is stars and forks stats for /kennetek/gridfinity-rebuilt-openscad repository. As of 26 Apr, 2024 this repository has 658 stars and 85 forks.
Gridfinity Rebuilt in OpenSCAD A ground-up port (with a few extra features) of the stock gridfinity bins in OpenSCAD. Open to feedback, because I could not feasibly test all combinations of bins. I tried my best to exactly match the original gridfinity dimensions, but some of the geometry is slightly incorrect (mainly fillets). However, I think they are negligible differences, and will not appear in the printed model. Full documentation can be found at the project's website. The project can also...
Gridfinity Rebuilt in OpenSCAD A ground-up port (with a few extra features) of the stock gridfinity bins in OpenSCAD. Open to feedback, because I could not feasibly test all combinations of bins. I tried my best to exactly match the original gridfinity dimensions, but some of the geometry is slightly incorrect (mainly fillets). However, I think they are negligible differences, and will not appear in the printed model. Full documentation can be found at the project's website. The project can also...
repo | techs | stars | weekly | forks | weekly |
---|---|---|---|---|---|
hominoids/SBC_Case_Builder | OpenSCAD | 188 | 0 | 19 | 0 |
Rhoban/sigmaban_urdf | OpenSCAD | 2 | 0 | 0 | 0 |
hominoids/SBC_Model_Framework | OpenSCAD | 56 | 0 | 16 | 0 |
Dimsmary/Dactyl-HelloWord | OpenSCADCOther | 50 | 0 | 6 | 0 |
yejianfengblue/dactyl-generator-demo | OpenSCADOther | 94 | 0 | 10 | 0 |
joao-pinheiro/atx_psu | OpenSCAD | 33 | 0 | 3 | 0 |
foosinn/Solo4Framework | OpenSCAD | 6 | 0 | 0 | 0 |
Manawyrm/Gigaset-Debug-Adapter | OpenSCAD | 22 | 0 | 1 | 0 |
Ghostkeeper/SettingsGuide | MarkdownSVGPython | 154 | 0 | 36 | 0 |
riskable/keycap_playground | OpenSCADPython | 281 | +2 | 28 | +1 |